Queclink GMT100 Spezifikationen PDF herunterladen (Seite 68)

GMT00 @Track Air Interface Protocol

TRACGMT100AN001 – 67 –

Reserved

Backup Battery

Percentage

<=3

0 – 100

Reserved

Send Time

YYYYMMDDHHMMSS

Count Number

0000 – FFFF

Tail Character

 <External Power Supply>: The voltage of the external power supply. If using command

AT+GTEPS to set the device report the external power supply voltage periodically with

fixed report, the device will send the current voltage along with +RESP:GTFRI message to

the backend server. If not set, this field will be empty.

 <Report ID/Report Type>: Indicate the working mode of the fixed report and the type of the

message.

Report ID has four meanings as below.

 1: fixed timing report.

 2: fixed distance report.

 3: fixed mileage report.

 4: fixed timing and mileage report.

Report type has two meanings as below.

 0: the normal fixed report.

 1: corner report which indicates that the device just turns around a corner.

 <Number>: The number of the GPS position included in the report message. In the message

+RESP:GTFRI, it probably includes one or several GPS position according to the setting of

<Send Interval> and <Check Interval>. If multi-position in one +RESP:GTFRI message, the

green part repeats.

 <Ignition Time Count>: If ignition time counter function is enabled by the command

AT+GTHMC, total ignition time counted when engine is on will be reported in this field. It

is formatted with 5 hour digits and 2 minute digits and 2 second digits and ranges from

00000:00:00– 99999:00:00. If the function is disabled, this field will be reserved.

 <Analog1 Input 1>: The voltage of the analog input 1. If using command AT+GTAIS to set

the device report the analog input 1 periodically with fixed report, the device will send the

current voltage of the analog input 1 along with +RESP:GTFRI message to the backend

server. If not set, this field will be empty.

 <Backup Battery Percentage>: The current volume of the backup battery in percentage.

 +RESP:GTEPS,

If the external power supply monitoring is enabled by the command AT+GTEPS, the device will

Queclink

Confidential

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 110 111

Kommentare zu diesen Handbüchern

Keine Kommentare

Queclink GMT100 Spezifikationen Seite 68

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Queclink GMT100