Queclink GMT100 Spezifikationen PDF herunterladen (Seite 66)

GMT00 @Track Air Interface Protocol

TRACGMT100AN001 – 65 –

is high speed, 2 is medium speed and 1 is low speed.

For the rest of the messages, it will always be 0.

Report type has different meanings in different messages as below.

 In the +RESP:GTDIS report message generated by the digital input

0: The current logical status of the input port is disable status.

1: The current logical status of the input is enable status.

 In the +RESP:GTIOB report message generated by bound IO

0: The current logical status of the bound IO does not meet the alarm condition.

1: The current logical status of the bound IO meets the alarm condition.

 In Geo-Fence report message +RESP:GTGEO

0: Exit from the Geo-Fence.

1: Enter the Geo-Fence.

 In the message of speed alarm +RESP:GTSPD

0: Outside of the predefined speed range.

1: Inside of the predefined speed range.

 In the message of protocol watch dog reboot message +RESP:GTDOG

1: Reboot message for time based working mode

2: Reboot message for ignition on working mode

3: Reboot message for input triggered reboot

 In the message of harsh behavior monitoring message +RESP:GTHBM

0: Harsh braking behavior

1: Harsh acceleration behavior

For the rest of the messages, it will always be 0.

 <Number>: The number of the GPS position included in the report message. Generally, it

equals to 1.

 <GPS Accuracy>: The HDOP defined in NMEA0183 (The National Marine Electronics

Association (NMEA) is a non-profit association of manufacturers, distributors, dealers,

educational institutions, and others interested in peripheral marine electronics occupations.

The NMEA 0183 standard defines an electrical interface and data protocol for

communications between marine instrumentation.). The range of value is 0 – 50. Here 0

means no GPS fix.

 <Speed>: The current speed. Unit: km/h

 <Azimuth>: The azimuth of the GPS fixing.

 <Altitude>: The height above the sea level.

 <Longitude>: The longitude of the current position.

 <Latitude>: The latitude of the current position.

 <GPS UTC Time>: The UTC time from the GPS chip.

 <MCC>: Mobile country code. It is 3 digits in length and ranges from 000–999.

 <MNC>: Mobile network code. It is 3 digits in length and ranges from 000–999.

 <LAC>: Location area code in hex format.

 <Cell ID>: Cell ID in hex format.

 <Mileage>: The current total mileage.

Queclink

Confidential

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 110 111

Kommentare zu diesen Handbüchern

Keine Kommentare

Queclink GMT100 Spezifikationen Seite 66

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Queclink GMT100