Queclink GL200 Spezifikationen PDF herunterladen (Seite 18)

GV300 @Track Air Interface Protocol

Tail Character 1 $ $

 <New Password>: Set to change the current password.

 <Device Name>: An ASCII string to represent the name of the device.

 <ODO Enable>: Enable/disable the odograph function to calculate the total mileage. The

current mileage is included in every position report message.

 <ODO Initial Mileage>: The initial value for calculating the total mileage.

 <GPS On Need>: Whether to close GPS chip after retrieving GPS position information.

z 0: Never close GPS chip

z 1: Close GPS chip after retrieving GPS information every time.

 <Report Composition Mask>: Bitwise report mask to configure the composition of report

message, especially the GPS information composition.

z Bit 0 for <Speed>

z Bit 1 for <Heading>

z Bit 2 for <Altitude>

z Bit 3 for GSM tower data, including <MCC>, <MNC>, <LAC>, <Cell ID> and the

<reserved> parameter “00”

z Bit 4 for <Mileage>

z Bit 5 for <Send Time>

z Bit 6 for <Device Name>

For each bit, set it to 1 to enable corresponding component in the report, 0 to disable. This

mask is effective to all report messages.

 <Power Saving Mode>: Set mode of power saving function. If mode of power saving

function is set to 1, the fixed report, geo-fence and speed alarm report functions are

suspended when the device is at a standstill or the engine is off. If mode of power saving

function is set to 2, it is mostly like mode 1 and the difference is that the fixed report will not

be suspended and the fix and send interval of it will be set to <IGF Report Interval> in

AT+GTFRI when the engine is off.

z 0: Disable power saving function

z 1: Mode 1 of power saving function

z 2: Mode 2 of power saving function

 <Event Mask>: Bitwise mask to configure which event report should be sent to the backend

server.

z Bit 0 for +RESP:GTPNA

z Bit 1 for +RESP:GTPFA

z Bit 2 for +RESP:GTMPN

z Bit 3 for +RESP:GTMPF

z Bit 4 is reserved

z Bit 5 for +RESP:GTBPL

z Bit 6 for +RESP:GTBTC

z Bit 7 for +RESP:GTSTC

z Bit 8 for +RESP:GTSTT

z Bit 9 for +RESP:GTANT

z Bit 10 for +RESP:GTPDP

TRACGV300AN002 – 17 –

Queclink

Confidential

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 118 119

Kommentare zu diesen Handbüchern

Keine Kommentare

Queclink GL200 Spezifikationen Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren Queclink GL200