Queclink GL200 Spezifikationen PDF herunterladen (Seite 46)

GV300 @Track Air Interface Protocol

3.2.16. Excessive Idling Detection

The command AT+GTIDL is used to detect the engine excessive idling (stationary while ignition

on). To use this command, the ignition signal must be connected to the device. When the device

detects that the vehicle is entering into the idle status, it will report event message

+RESP:GTIDN to the backend server. When the vehicle leaves the idle status, the device will

report event message +RESP:GTIDF to the backend server.

¾ AT+GTIDL=

Example:

AT+GTIDL=gv300,1,2,1,,,,,1,1,0,0,,,,,000F$

Parameter Length(byte) Range/Format Default

Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z' gv300

Mode 1 0|1 0

Time to Stationary 1 1 – 5 min 2

Time to Movement 1 1 – 5 min 1

Reserved 0

Output ID 1 0 – 3 0

Output Status 1 0|1 0

Duration <=3 0 – 255(×100ms) 0

Toggle Times <=3 0 – 255 0

Reserved 0

Serial Number 4 0000 – FFFF

Tail Character 1 $ $

 <Mode>: Working mode.

z 0: Disable this function

z 1: Enable this function.

 <Time to Stationary>: If the vehicle is detected to be stationary with ignition on for this time

TRACGV300AN002 – 45 –

Queclink

Confidential

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 118 119

Keine Kommentare

Queclink GL200 Spezifikationen Seite 46